Revised BetaNet Node Hardware Requirements

In my case, I have fiber from Vodafone and to avoid the Router firmware limitations I mantain the ONT and install a Mikrotik Router configured with the VLANs for the contracted services. The ISP provides a public IP adddress on the internet VLAN. Where do you live?

As I understand, the goal for the Gateway is to avoid DoS on the node side. They have two different Public IP. In your case your configuration is only on LAN side, right?

hi, from Spain, and you?

Thanks. I live in India. I am not able to get any definitive answers from the ISPs and not sure if I’d be able to run node easily without trying out a few ISPs first and then cancel the contract for the ones that doesn’t work out.

I’m from the Iberian team also, Portugal. Saludos!

1 Like

I have a probably silly question: if I have a fiber line at home with your router of for example 600 mb, to which I have connected a couple of pcs for home use, it is absolutely necessary to contract another independent line with another router or is there some way in which I can use the line that I already have contracted and maintain the connection of the home pcs?
Thanks

1 Like

Check it please. Any suggestion or comment would be welcome.

-AMD Ryzen 7 3700x
-AARDWOLF Performa 10X ARGB (APF-10XPFM-120 ARGB)
-MSI B450M MORTAR MAX
-32[2x16]GB DDR4 3200MHz G.Skill Ripjaws V (F4-3200C16D-32GVK)
-NVIDIA GeForce Gigabyte RTX 2070 SUPER (GV-N207SGAMING OC-8GD) 8Gb DDR6
-SSD M.2 Samsung 1Tb 970 PRO Series (MZ-V7P1T0BW)
-Deepcool Matrexx 55meshBlack (DP-ATX-MATREXX55-mesh)
-Chieftec 550Wgpu-550FC
-140mm be quiet! Purewings 2
-140mm be quiet! Purewings 2
-120mm be quiet! Purewings 2

Can you please check for Gateway? Do i need anything else for a Gateway?

AMD Athlon 3000G 3.5GHZ
Samsung 860 EVO SATA 250 GB SSD 3.0
POWER BOOST VK-1630 500w USB 3.0 M
GSKILL 8GB Ripjaws V 3000MHZ CL16 DDR4 Sin
GIGABYTE A320M H 3200MHZ(OC) DDR4 Soket AM4 M.2 HD

Thanks in advance for your help.

@Selo Everything looks good for both the node and gateway.

2 Likes

Saludos! Como esta todo Por España? Listo con tu node?

Hola, the node is already tested with the Keith and Rick help. Are you follow the Discord channel?
Saludos.

2 Likes

Congratulations! I’m still working on mine. I needed new Internet service provider to increase speed. Hopefully I’ll be able get it on time.

For Node + Gateway are two storage units mandatory, or I can use one single High Speed Enterprise NVME (PCI) SSD with enough space for both?

It should be OK for now (@Keith or @benger will be able to confirm) but with changes in code and Betanet requirement you MIGHT have to separate the two.
When it comes to main net they will NEED to be separate. One for the node and one for the gateway. The node and gateway will need to be separate machines with separate IP addresses.

Hi everyone,
About GPU, I found in PassMark that GPU RTX 2060 SUPER has similar performance than RTX 2070. Can it be considered 2060 SUPER as an option for HW’s node?
Thanks and Kind regards,
Rodrigo

Nope, it hasn’t enough cuda cores.

1 Like

Ok, thanks!

Desktop computer :

  • Intel Core i7 10700K
  • 16GB DDR4
  • 1TB NVMe SSD
  • NVIDIA RTX3060Ti 8GB
    or:
    Laptop comp.
  • Intel Core i7 10750H
  • 16GB DDR4
  • 1TB NVMe SSD
  • NVIDIA RTX2070 8GB

has this guide been released yet?

This is more of a “it can be done” rather then a guide.
https://staging-forum.xx.network/t/the-mythical-1u-betanode